green a yellow green green a orange/green 203299 203282 203297 203295 203296 orange/green l9 yellow yellow green red l8 l4 l3 l2 led 2 links led 2 left ident.-nr. no. led 1 rechts led 1 right code led yellow 203294 green l1 red 203298 green l5 a a a a index date b 09.06.2008 i (1/2) class mjim 8c8t, 1x4, int. mag., led mod jack - mjim 203293 1:1 consider protection memo from din 34 information: tolerances scale all dimensions in mm www.erni.com before using. subject to modification without prior notice. designation drawing will not be updated. all rights reserved. only for information. to insure that this is the latest version of this drawing, please contact one of the erni companies a3 recommended panel cutout empfohlener frontplatten ausschnitt top of pcb lp 0,008 2,370 60,19 0,20 0,015 0,004 0,38 0,10 14,89 0,586 note 1: rear shield tabs between each port (t) note 2: side ground tab rear of peg 3.05 mm (r) note 3: panel ground flanges both sides, bottom and top (gf5) led 1 led 2 18181818 b 0,850 max 21,59 10,89 0,020 0,429 59,09 2,326 6 x 6.99 [0.275] = (41.94 [1.651]) 0,120 53,34 0,13 2,100 0,005 3,05 0,50 13,80 0,543 schematic no: m3d01 materials and finish led lens: epoxy housing: glass filled polyester ul 94 v-0 black shielding: cu alloy, plated with ni electrical characteristics contact resistance: 30 milliohms max operating temperature: 0c to 70c terminal finish: sn matte contact finish: au, 0.8 m (30 in) over ni mechanical characteristics contacts: phosphor bronze durability: 1000 mating cycles b
b 910 11 1 12 8 all tolerances 0.05 [.002] unless noted empfohlenes leiterplatten-layout (bestckungsseite) recommended pcb layout - component side view 1 8 1 8 1 8 9 10 11 12 9 10 11 12 910 11 12 1,60 0,07 x5 0,063 0,003 4,06 0,160 2,29 0,090 1,27 0,050 2,54 0,100 0,89 0,07 x32 0,035 0,003 2,73 0,107 52,07 2,050 40,64 1,600 51,56 2,030 41,15 1,620 53,34 2,100 2.54 [.100] 37,59 1,480 27,18 1,070 23,62 0,930 13,21 0,520 10,16 0,400 12,70 0,500 24,13 0,950 26,67 1,050 38,10 1,500 3,25 0,07 x2 0,128 0,003 9,65 0,380 0,76 0,030 1,02 0,07 x16 0,040 0,003 2,73 0,107 10,16 0,400 8,89 0,350 3,05 0,120 2,54 0,100 mjim 8c8t, 1x4, int. mag., led mod jack - mjim 203293 1:1 consider protection memo from din 34 information: tolerances scale all dimensions in mm designation subject to modification without prior notice. drawing will not be updated. all rights reserved. only for information. to insure that this is the latest version of this drawing, please contact one of the erni companies before using. www.erni.com i (2/2) class a3 60 - 80 mhz -12 db min 0.1 - 30 mhz -50 db typ isolation 1500 vrms 60 - 100 mhz -35 db typ 30 - 60 mhz -40 db typ 1-100 mhz -40 db typ cmr: crosstalk: return loss: 50 mhz -13.6 db min insertion loss: turns ratio: ocl(100 khz, 0.1 vrms, 8 ma) magnetics specifications @ 25c 0.1-100 mhz -1.1 db max 40 mhz: -15.5 db min 0.5 - 30 mhz: -18 db min auto mdix compatible (p1-p2 : j1-j2) (p3-p6 : j3-j6) 1ct : 1 3% 1ct : 1 3% (p1-p2 : p3-p6) dcr (p1-p2, p3-p6) 0.9 ohms max 350h min 2.2 2.25 2.05/2.2 color farbe v typ 2.1 ma max led anweisung yellow green red orange/green circuit diagram 2.5 2.5 2.5 2.5 20 20 20 20 schaltskizze 10 91112 911 10 12 911 10 12 911 10 12 led specifications ff v f i g n g n a electrical schematic m3d01 n/c p7 gnd p8 1000pf/2kv 4x 75 ohms p1 ct p5 ct p4 p3 p6 p2 pcb elektrischer schaltplan j7,8 j4,5 cable j1 j3 j6 j2
|
